1. When the tank is empty, hose down all surfaces with cold water to remove loose milk residues. 
2. Close the outlet and while the tank is moist, sprinkle crystals all over the interior surfaces and lids using the following quantities: 

100g for 600 litre tank (4oz for 150 gallon tank)
125g for 1000 litre tank (5oz for 250 gallon tank)
150g for 1600 litre tank (6oz for 400 gallon tank)

3. With a clean soft tank brush, work up the powder into a soft paste and scrub all interior surfaces. Ensure that the corners, bung, dip stock, outlet cap outlet plugs, outlet tube, interior fittings, agitators, undersides of bridge and lids are well treated. 
4. Allow at least 10 minutes contact time before thoroughly rinsing out the tank by hosing with clean water. Allow to drain completely.  

Final Rinse: It is an offence to allow chemical agents to get into milk. Therefore, after cleaning with the product and before the equipment is used again, it must be thoroughly rinsed with clean water.
Hypochlorite may be added to the final clean water rinse at the rate of 25ml to 40 litres (1 fl.oz to 10 gallons of water), where the supply requires treatment.

ANTIMICROBIAL EFFICACY

KLEANZE passes stringent British Standards Test BS EN 1276 (Quantitative suspension test for the evaluation of bactericidal activity of Chemical Disinfectants and Antiseptics used in Food, Industrial, Domestic and Institutional areas) at a dilution of 1:200. This means that at use dilution Kleanze can achieve a 100,000-fold reduction in bacterial populations with only 5 min contact time, under dirty and hard water conditions. For pre-cleaned items the same bacterial kill can be achieved at much lower concentrations. KLEANZE passes BS EN 1656 with 1 min contact time.

SPECIFICATION

Appearance
Composition
Odour
Pack Size

:
:
:
:

Pink Powder
Hypochlorites, Tri Sodium Phosphate, mild Alkaline Detergents
Slight Chlorine
5lt, 25kg, 200kg & 1000kg IBC